- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
- USB rechargeable headlight producing up to 70 lumens - 4 modes including 3 solid power settings and 1 flashing mode - Low battery and charging indicator - Multi-fit rubber strap mounts to a wide variety of handlebar sizes - Steel clip included for attachment to clothing or bags
- USB rechargeable tail light producing up to 20 lumens - 4 modes including 3 solid setting and 1 flashing mode - Multi-fit rubber attachment is compatible with a variety of bar sizes and styles - Low battery and charging indicator - Up to 12 hour run time per charge - Includes a steel clip for attaching to clothing or bags
- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating
- USB rechargeable super bright COB style LED combo pack - 8 modes each - 4 brightness levels of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time
Portland Design Works' Gravity Tail Light has a built-in accelerometer that detects deceleration or swerving and automatically changes to a super bright, solid beam to warn following traffic. To allow the accelerometer to calibrate, always install the Gravity on your bike before powering it on. Hold the power button down for 1 second to turn the light on or off. Then, keep your bike still for 1 second after pressing the power button to complete the calibration. The Gravity Tail Light has a redesigned mount that works with the included seatpost and seatstay brackets. - Automatic accelerometer brake light function shines 100 lumens bright - 2 Modes (runtime): Solid - 20 lumens (12 hours), Flash - 80 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. - Daylight Visible Flash (DVF) - A wearable safety light – clip onto various straps, belt loops, etc. - Visible up to 1 mile - Internal reflector = visible if light on off mode - Easily replaceable AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - FL 1 Standard IP64, water resistant WARRANTY The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side “gills” that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. Side lights Economical, high output light Super bright flash setting ideal for daylight use Easy operation battery operated (comes with 2 x AA) 3 light settings – High, Low and Flash Lumen Output: 150 Run Time: 18:00 – 72:00hrs Weight: 175g Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Light Head Handlebar Mount 2 AA Alkaline Batteries
The NiteRider Solas 150 use two powerful LEDs to produce an amazing 150 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. NiteRider implemented “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. - Daylight Visible Flash (DVF) - 150 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Night Crawler light uses a versatile band so it can be used as an ankle strap or installed on different objects like a helmet or bag. - Adjustable band wraps around an ankle, arm, helmet vents, or bag straps - Steady and Flashing light modes - Run time: 15 hours steady mode, 30+ hours flashing mode - CR2032 batteries included
MSW's TLT-200 lights are a small, simple, after-dark essential. And don't let their small size fool you, these lights pack a punch! They're also water-resistant for those less-than-perfect days when you're racing the radar back home. • Simple mode selection: on, off, flashing • Universal attachment (fits 20-40mm) • Taillight mount is angled to fit seatposts • Output: 7 lumens rear (red) • Run time: 50 hours (steady), 150 hours (flashing)
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Powerful output, compact design, and robust engineering creates the perfect cord-free trail light. Penetrating spot beam provides ideal illumination for both helmet and handlebar setups with innovative mounting options including a versatile GoPro interface. Featuring: - 1000 Lumen Output (FL-1 Certified) With CREE LED - Custom Optics Optimized to Enhance Trail Definition - Waterproof Design Provides All-Weather Reliability - High/Medium One Touch Toggle Mode - Micro USB Rechargeable With Fast Charge Technology - Quick Release Handlebar Mount and GoPro Interface Included: - Quick Release Handlebar Mount, Helmet mount, GoPro Mount, & Micro USB Charging Cable
Daily commuting requires equipment that provides superior performance, in any condition, day after day. Urban 1000 blends impressive power with a safety feature set unmatched in cycling lights. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating – meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. Integrating state-of-the-art safety innovations with premium power, Urban 1000 is designed for the serious cyclist. Features - 1000 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - SafePulse light pattern scientifically designed for maximum driver awareness of approaching cyclist without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn’t slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure – water immersion - Charging is reliable and effective with included Micro USB Cable Specifications - Lumens: 1000 (high), 500 (medium), 250 (low), 500 (SafePulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (SafePulse) - Beam Angle: 20° (spot) - Charge Time: 360 min
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Light & Motion's Vis 180 Taillight offers both visibility and convenience with its unique design. It combines high-power LEDs, custom reflectors and a rechargeable lithium battery for total convenience and unmatched visibility on the road and trail. Featuring: • 70 Lumen output certified to the FL-1 Standard. • Engineered with the highest-level CREE LED and enhanced firmware. • Dual LED array to maximize visibility. • Ultralight aluminum body. • Accurate battery charge and status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees. • Secondary LED spreads amber light for 180 degrees of visibility. • Simple ratchet in/out adjustability. • Slide lock system allows you to easily take on/off without tools. • Integrated clip for attaching to backpack or messenger bag. • Bike rack mount available and sold separately. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Run time/Lumens • HiPulse: 6:00/70 • LoPulse: 12:00/35 • Solid: 4:00/75 • Paceline: 32:00/5
Light & Motion's Vis 180 Micro rear bike light offers both visibility and convenience with its unique compact design. It combines high-power leds, custom reflectors and a rechargeable lithium battery in a micro-sized package for total convenience and unmatched visibility on the road or on the trail. Featuring: • 25 Lumen output certified to the FL-1 Standard • Engineered with the highest level CREE LED and enhanced firmware. • Dual LED array to maximize visibility. Accurate battery status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees. • Secondary LED spreads amber light for 180 degrees of visibility. • Simple ratchet in/out adjustability • Simple tool-free mounting system - easy to take on and off. • Integrated clip for attaching to backpack or messenger bag • Bike rack mount available and sold separately • MicroUSB Rechargeable (Fully charges in 2.5 hours) • Low battery warning and auto shut-off to prevent damage • Multiple power settings. Run time/Lumens: • HiPulse: 6:00 / 25 • LoPulse: 12:00 / 13 • Solid: 4:00 / 25 • LoPulse: 20:00 / 13
The perfect light for ultra-endurance gravel cyclists and bikepackers. Vis Pro 1000Trail blends impressive power with the ability to run all day on portable power. The impressive power provides an ideal range of vision with a pinged reflector to provide punch down the trail. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip to ensure the light doesn't slip during critical downhill sections. Helmet mounting is quick and simple with the included helmet mount; this ultra-lightweight setup is barely felt when balanced on the helmet. For riders that already have GoPro mounts, the GoPro interface is included. Backing up the power of the light is reliable construction unmatched in the market. This is the only waterproof trail light with an IP67 rating—meaning the light is certified to withstand water immersion up to 1-meter depth. Ride with confidence, in any condition, knowing the light is up for the challenge. When it comes time to recharge, plug the included Micro USB cable into any 2 Amp charger and the FC (Fast Charge) electronics ensure a full charge in 2.5 hours. From after-work night laps to full-on 24-hour racing, the Trail 1000 is the choice for ultra-compact power. Key Features - 1000 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Charge and light off portable battery power with an output of 150 lumens for daylight safety - Multiple power settings include a one-touch High/Medium toggle so trail riders can rapidly switch power between climbs and descents without having to cycle through various settings - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Included helmet mount provides an ultra-lightweight and simple attachment solution so riders aren't encumbered by a bulky/heavy light setup - Waterproof design eliminates the leading cause of bike light failure - water immersion - FC (Fast Charge) Electronics ideal for 24 Hour Racing or for those that always forget to recharge their light from the previous ride Tech Specs - Lumens: 1000 (high), 500 (medium), 250 (low), 500 (SafePulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (SafePulse) - Beam Angle: 20° (Spot) - Charge Time: 150 min - Fast Charge: Yes - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet Includes - Vis Pro 1000 Trail - Vis/Urban Bar Mount - Gopro Mount - Micro USB Cable
Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
The Classic Drive is a new model with classic Lezyne styling. Its machined aluminum cylindrical construction is sleek, compact and lightweight. It features a single LED with up to 500 lumens and disruptive Daytime Flash mode. It has eight output modes and boasts up to 40 hours of run-time. Cutouts for side visibility increase safety, and its versatile strap mounts securely to most handlebars on the market. Micro-USB rechargeable. - Max Lumens: 500 - Weight: 95g - Max Run-time: 40 hours - Recharge Time: 3 hours
The Lezyne Femto Drive Duo is a two-in-one safety light integrated into a versatile helmet mount. Front and rear light coupled by a composite matrix junction. Compatible with nearly all vented-style helmets. LEDs are housed in a super compact, lightweight and durable machined aluminum body. High-grade polycarbonate lenses provide side visibility and double as the power button. Front: 15 lumens, Rear: 7 lumens, two output modes. Easy to replace CR2032 batteries.
$24.99 - $25.99
Lezyne's Femto Drive Pair are compact, bright, and beautifully made front and rear safety lights. The Femto Front is an ultra-compact safety light with integrated lens On/Off switch. Durable machined aluminum construction. Side Visibility lens extends beyond body to provide 180 degrees of visibility. Two replaceable CR2032 batteries power one bright LED. Up to 15 lumens with two output/flash options. Available in seven unique anodized colors. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. The Femto Rear mirrors the design of the Femto Rear, but puts out up to 7 lumens of red light with two output/flash modes.
Front Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of run-time (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Rear Compact, aero-post-compatible safety light with two bright LEDs. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of run-time (seven hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive rear provides up to 10 lumens and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 200 (front) / 10 (rear) - Weight: 47.5g (front) / 54g (rear) - Max Runtime: 20 hours (front) / 20 hours (rear) - Recharge Time: 3 hours (front) / 3 hours (rear)
For complete visibility, a pair of Lezyne's Front and Rear KTV Drive Lights has you covered. Lezyne's KTV Front Light is a compact, high-visibility safety light with two ultra-bright LEDs. Durable, waterproof construction. Super lightweight. Provides up to 180 lumens and six output/flash modes. Side visibility cutouts for 180 degrees of visibility. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. Integrated USB stick for convenient cable-free recharging. Lezyne's KTV Drive Rear also uses two ultra-bright LEDs and enjoys the same durable, waterproof, and super lightweight construction. It provides up to ten lumens and three output/flash modes with a wraparound lens for 180 degrees of visibility. Unique aero and round post compatible design, and features the same integrated USB stick as the front light for convenient cable-free recharging of your entire set.
Lezyne's KTV Drive Pro Rear is a compact, high visibility safety light with two ultra-bright LEDs. Super light, durable waterproof construction. Features five output modes, including the high-visibility 75-lumen Daytime Flash mode. Extended lens for 180 degrees of visibility. Unique aero and round post compatible design. Integrated USB stick for convenient cable-free recharging.
Page 1 of 2 Next page