Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain

Scott Genius eRIDE 920
$4,999.99
Welcome to the next E-Bike generation with the new Genius eRIDE 920. Avant-garde design, cutting-edge technologies and integration, and advanced battery management, the Genius eRIDE 920 places priority on the riding experience. This is the ultimate choice for riders who want confidence when the terrain gets rougher! Bosch Power Tube Thanks to their range, long service life, intelligent battery management system and easy handling, Bosch Power Tube lithium-ion batteries are among the most modern on the market. All those decades of Bosch experience has paid off! Bosch Performance CX Gen 4 Drive Unit The new Performance CX generation is now 48% smaller and 25% lighter compared to the previous generation. More compact but no less powerful, the new Bosch Performance CX Generation 4 comes with a maximum power output of 75Nm and 340%. Choose between 5 assist modes or opt for the comfort of the eMTB mode which automatically adapts the assistance like an automatic gearbox does in a car. Scott Impact Damper The bottom bracket area is exposed to flying rocks or other potential impacts, therefore we have developed our own specific skid plate, the “Impact Damper”. It is reinforced to handle impacts, is covered with a rubber layer to reduce noise, and is ventilated to improve drive unit airflow. eRide Advanced Design With this new E-Bike generation, the design has been pushed further than ever before. More than a battery integrated into the frame, we see the bike as a system where every part must be taken into consideration. Therefore, to improve the integration, we have worked a lot on the line continuity but also on the design balance from the headtube to the dropouts. Enjoy a bike with a unique character! Syncros Fork Stop Headset Developed in collaboration with Syncros for the Genius eRIDE, the fork stop restricts the range of motion to 60 degrees, preventing the fork crown from impacting the frame, protecting you and your bike. Scott eRide Range Extender Compatible SCOTT eRIDE engineering team has developed a specific mount that is fixed to the bottle cage slots. A standard 500Wh Bosch battery (sold separately) can be added on the Range Extender mount. This results in a total of 1125Wh. To recharge, just one charger is needed. The Bosch digital display will take into consideration both batteries. Focus on your journey and not on your battery level! - Genius eRIDE Alloy Frame - FOX 36 Rhythm 150mm Fork - FOX Float EVOL, 150mm, TwinLoc Rear Shock - SRAM SX Eagle 12 Speed Drivetrain - Bosch CX, up to 1125Wh, PowerTube Battery - Shimano 4 Piston Disc Brakes - Schwalbe Kevlar 29 x 2.6" Tires - Syncros Dropper Post
Scott Genius eRide 900 Tuned
$7,499.99
The Genius eRIDE is a pedal-assist game changer. With the Shimano STEPS system and modern geometry, you can explore the mountains like you never have before. The TwinLoc system allows you to not only change compression dampening but also to change the spring curve, dynamically altering the geometry of the bike. This allows you to have the most efficient bike handling in any riding situation, which is even more valuable with the extra weight of an E-Bike. With the steps E-8000 series, Shimano delivers next-level component integration, connectivity, and performance. To meet MTB specific needs, the E-8000 series was designed with all day riding in mind. The Lithium-Ion battery has a 500WH capacity that can be charged up to 80% in only 2.5 hours. It features a low-profile drive system, specifically designed for mountain bikes, which improves both impact and vibration resistance. The compact design allows for shorter chain stays and more tire clearance, and its low weight substantially improves handling and ride feel. You can switch between 3 assist modes: ECO, TRAIL, and BOOST, using levers that were designed for mountain bikes to offer a similar feel to that of a gear shifter. The Genius eRide 900 features a lightweight aluminum frame with a tapered headtube, boost spacing, and internal routing. The Fox Float 36 with Kashima coating and Fox Nude TR Evol rear shock provide 150mm of trail-taming suspension. A Shimano XT STEPS crankset is paired with SRAM X01 Eagle rear derailleur and GX shifter, for an accurate and reliable 12-speed drivetrain. DT Swiss H1825 Spline wheels are light, stiff, and built for the extra demands of an e-MTB. They come mounted with a perfect combo of Schwalbe Magic Mary front and Hans Dampf rear tires. Completing the performance package, a Fox Transfer dropper post with Kashima coating increases this bike's aggressive abilities, while a 740mm Syncros carbon bar adds extra stiffness to the front end.
Scott Genius eRide 910
$6,499.99
The Genius eRIDE is a pedal-assist game changer. With the Shimano STEPS system and modern geometry, you can explore the mountains like you never have before. The TwinLoc system allows you to not only change compression dampening but also to change the spring curve, dynamically altering the geometry of the bike. This allows you to have the most efficient bike handling in any riding situation, which is even more valuable with the extra weight of an E-Bike. With the steps E-8000 series, Shimano delivers next-level component integration, connectivity, and performance. To meet MTB specific needs, the E-8000 series was designed with all day riding in mind. The Lithium-Ion battery has a 500WH capacity that can be charged up to 80% in only 2.5 hours. It features a low-profile drive system, specifically designed for mountain bikes, which improves both impact and vibration resistance. The compact design allows for shorter chain stays and more tire clearance, and its low weight substantially improves handling and ride feel. You can switch between 3 assist modes: ECO, TRAIL, and BOOST, using levers that were designed for mountain bikes to offer a similar feel to that of a gear shifter. The Genius eRide 910 features a lightweight aluminum frame with a tapered headtube, boost spacing, and internal routing. The Fox Float Performance Elite fork has 36mm stanchions for exceptional stiffness and predictable handling. It's paired with a Fox Nude TR Evol rear shock to provide 150mm of trail-taming suspension. A Shimano XT STEPS crankset is paired with a SRAM NX Eagle drivetrain, offering a massive 12-gear range for tackling all kinds of terrain. Shimano BR-M640 ZEE Disc brakes provide a level of power and control intended for downhill riding, which is ideal for handling the added momentum of an e-MTB. The Syncros X-30S rims are tubeless ready, and at 30mm wide are perfectly suited for plus-sized tires. They come mounted with a perfect combo of Schwalbe Magic Mary front and Hans Dampf rear tires. A Fox Transfer dropper post further increases this bike's aggressive abilities.
Scott Ransom 900 Tuned
$7,599.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The Tuned version comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset, and high-end Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX Frame - FOX 36 Float Factory 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM X01 Eagle 12-Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Ransom 910
$5,499.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning, mountain biking excellence. The 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model, the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction - While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Scale RC 900 World Cup AXS
$6,799.99
World Cup aspirations require a World Cup Quality ride. Lightweight, stiff, fast — this is what you can expect from the Scale RC 900 World Cup. With SRAM's new AXS Wireless shifting and carbon wizardry, the World Cup can help you go from Nino Schurter super fan to perhaps putting on the leader's jersey. The bike can make it there, can you? Only time will tell. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Axle Tool Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit our frame. Additionally, we introduce a new multifunctional tool integrated into the inner part of the thru-axle itself. This 25T Torx wrench is easy to reach and ready to be used for quick adjustments on the trails. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale RC Carbon HMX Frame - RockShox SID Ultimate RLC3 100mm Fork - SRAM XX1/X01 AXS Eagle 12 Speed Drivetrain - SRAM Level TLM Hydraulic Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - WTB Ranger 29 x 2.25" Kevlar Tires - Syncros Carbon Components
Scott Spark 900 Ultimate AXS
$8,999.99
The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts
Scott Spark RC 900 Pro
$5,199.99
Anyone who ever dreamed of a pro cross-country racing career has dreamed of the Spark RC 900 Pro. The 1x-specific Spark RC frame design and lightweight, hyper-efficient TwinLoc Suspension System are made for pure, on-course performance. The Pro build includes a Shimano XTR 12-speed drivetrain and XTR brakes, and is made to go the distance with premium Syncros components completing this race-worthy package in style. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - Shimano XTR 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Spark RC 900 SL AXS
$11,999.99
Having already written itself into the history books, the Spark platform has been revamped, and is faster and fitter than ever. With the lightest frame in the RC series, the SL version comes equipped with a FOX 32 SC Fork, a SRAM Eagle AXS 12-speed wireless drivetrain, and a host of Syncros carbon components that will make any rider feel like they can go toe to toe with the world's finest. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Key Features - Spark RC Carbon HMX SL 1799g Frame - FOX 32 SC Float Factory 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.0 SL CF Wheels - Maxxis Rekon Race Kevlar Tires - Syncros SL Carbon Parts
Scott Spark RC 900 Team
$3,999.99
The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts
Scott Spark RC 900 Team Issue AXS
$4,999.99
With the Spark RC Team Issue AXS, take your World Championship dreams and start making them a reality. The fastest frame on the market, a wireless SRAM 12-speed groupset and Syncros components combine to give you the perfect tool for the job, whether you're racing a local weekend race or toeing it up for your first World Cup. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM X01 AXS Eagle 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Spark RC 900 World Cup
$5,999.99
The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Select+ fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM X01 Eagle 12-speed drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Key Features - Spark RC Carbon HMX Frame - RockShox SID Select+RL3 100mm Fork - RS Nude RL3, 100mm TwinLoc - SRAM X01 Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Spark RC 900 World Cup AXS
$7,299.99
The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Ultimate fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM Eagle AXS 12-speed wireless drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Rocker Link - The Spark carbon linkage is constructed with a compression molding process. It’s 37g lighter than the aluminum equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage, without sacrificing stiffness. Key Features - Spark RC Carbon HMX Frame - RockShox SID Ult. RLC3 100mm Fork - RS Nude RLC3, 100mm TwinLoc - SRAM XX1 AXS Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Strike eRide 910
$5,499.99
The Scott Strike eRide 910 takes your trail riding up a few watts. With 140mm of travel offered by a Fox 34 Float Performance Elite Air fork and a Fox Nude EVOL shock, it irons out rutted jeep trails and soaks up the rough stuff on rowdy singletrack. The Bosch Performance CX 250 drive system bolsters your ride, allowing you to explore further and put more trail under your tires with a focus on long-range efficiency. Large-diameter 29 x 2.6-inch Maxxis Rekon tires roll over pretty much anything and let you keep momentum where smaller tires struggle. You and the Bosch drive system supply power through SRAM’s GX/NX Eagle drivetrain, which offers 12 wide-ranging gears to get you anywhere you want to go with lightweight simplicity. Downhill-ready Shimano ZEE brakes and 203mm rotors ensure you have the stopping power to push yourself and the Strike eRide on descents, and the Fox Transfer dropper post rounds out the Strike eRide’s descending prowess. See for yourself how the Strike eRide will fundamentally change your XC experience.
Scott Strike eRide 930
$4,399.99
The Scott Strike eRide 930 takes your trail riding up a few watts. With 140mm of travel front and rear, it irons out rutted jeep trails and soaks up the rough stuff on rowdy singletrack. The Bosch Performance CX 250 drive system bolsters your ride, allowing you to explore further and put more trail under your tires with a focus on long-range efficiency. Large-diameter 29 x 2.6-inch Maxxis Rekon tires roll over pretty much anything and let you keep momentum where smaller tires struggle. You and the Bosch drive system supply power through SRAM’s NX Eagle drivetrain, which offers 12 wide-ranging gears to get you anywhere you want to go with lightweight simplicity. Big, Shimano MT520 brakes and 203mm rotors ensure you have the stopping power to push yourself and the Strike eRide on descents, and the Syncros dropper post rounds out the Strike eRide’s descending prowess. See for yourself how the Strike eRide will fundamentally change your XC experience.
Salsa Beargrease Carbon Frameset
$1,799.00
Beargrease is Salsa's carbon hotrod fat bike frame, designed to convert strength and determination into speed. The super light chassis paired with your choice of sure-footed 27.5 x 4 wheels and tires reinforce Beargrease’s objective; to keep you in the express lane wherever you’re headed. Point your front wheel towards the start line of a race on groomed snow or singletrack, challenge yourself on an overnight bikepacking trip, or just get your trail riding on.
Salsa Beargrease Carbon GX Eagle
$3,899.00
Beargrease is Salsa's carbon hotrod fat bike, designed to convert strength and determination into speed. The super light chassis and the sure-footed rollover of 27.5 x 4 wheels and tires reinforce Beargrease’s objective; to keep you in the express lane wherever you’re headed. Point your front wheel towards the start line of a race on groomed snow or singletrack, challenge yourself on an overnight bikepacking trip, or just get your trail riding on. Sun Ringle Mulefut rims are shod with Maxxis tires for sure-footed traction wherever your path leads. The Beargrease ditches the double chainring for a super-wide SRAM GX Eagle 1x12 drivetrain. And SRAM Guide R brakes keep the fun under control.
Salsa Beargrease Carbon GX Eagle
$3,699.00
Beargrease is constructed with a high-modulus carbon fiber frame. This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Its carefully designed geometry results in a fat bike that rides like a trail bike—it’s stable, steers well in loose conditions, and remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider’s center of gravity low, and making dabbing, dismounting, and remounting easier. Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 5" tire without the added rolling resistance. It’s also compatible with 26" and 29" wheels for dialing in the fit or terrain-dependent performance. The Beargrease Carbon frame features fully sleeved internal cable routing. This improves shifting performance in poor conditions, increases time between maintenance intervals, and makes running new cables and housing a breeze. It’s designed for the best drivetrain performance while maintaining narrow fat bike crank arms for less knee stress, with rider-friendly narrow Q-Factor cranks, a 1x optimized frame design, and room for up to a 32t max chainring. Beargrease Carbon features numerous accessory mounts, including toptube bosses for a Salsa EXP Series Toptube Bag (sold separately), 1 – 2 water bottle mounts inside the frame triangle (depending on frame size), and an accessory mount underneath the downtube. Plus, it’s compatible with dropper seatposts for true trail bike riding experiences. Featuring a full carbon design, the Kingpin Deluxe Fork is lightweight and durable and provides an amazing array of accessory bosses to help you make the most of your fat bike: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessory, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Beargrease Carbon GX Eagle features the versatile 1x12 SRAM GX Eagle drivetrain. It comes equipped with sure-footed SUN Ringle Mulefüt SL 80mm rims with 27.5 x 3.8" 45NRTH Dillinger 4 tires to give you traction, no matter how challenging the surface. SRAM Guide R brakes, a WTB Volt Race saddle, and Salsa Deluxe cockpit components take this bike's performance up a hefty notch.
Salsa Beargrease Carbon NX Eagle
$2,899.00
Beargrease is our carbon hotrod fat bike, designed to convert strength and determination into speed. The super light chassis and the sure-footed rollover of 27.5 x 4 wheels and tires reinforce Beargrease’s objective; to keep you in the express lane wherever you’re headed. Point your front wheel towards the start line of a race on groomed snow or singletrack, challenge yourself on an overnight bikepacking trip, or just get your trail riding on. It's all traction all the time with fast and shreddy Maxxis tires on Sun Ringle Mulefut rims. And the SRAM NX Eagle drivetrain, with twelve snappy, wide-ranging gears, gets you through the ups, downs, and all-arounds of your daily ride. Need to keep your speed in check? SRAM Guide brakes are on duty, keeping everything calm and controlled.
Salsa Beargrease Carbon NX Eagle
$3,049.00
Beargrease is constructed with a high-modulus carbon fiber frame. This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Its carefully designed geometry results in a fat bike that rides like a trail bike—it’s stable, steers well in loose conditions, and remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider’s center of gravity low, and making dabbing, dismounting, and remounting easier. Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 5" tire without the added rolling resistance. It’s also compatible with 26" and 29" wheels for dialing in the fit or terrain-dependent performance. The Beargrease Carbon frame features fully sleeved internal cable routing. This improves shifting performance in poor conditions, increases time between maintenance intervals, and makes running new cables and housing a breeze. It’s designed for the best drivetrain performance while maintaining narrow fat bike crank arms for less knee stress, with rider-friendly narrow Q-Factor cranks, a 1x optimized frame design, and room for up to a 32t max chainring. Beargrease Carbon features numerous accessory mounts, including toptube bosses for a Salsa EXP Series Toptube Bag (sold separately), 1 – 2 water bottle mounts inside the frame triangle (depending on frame size), and an accessory mount underneath the downtube. Plus, it’s compatible with dropper seatposts for true trail bike riding experiences. Beargrease Carbon NX Eagle comes equipped with the Kingpin carbon fork and is designed around SRAM NX Eagle, a 1x12 drivetrain with the perfect blend of performance and affordability. It sports SRAM Guide T brakes that provide supreme control and braking modulation. The result is an incredible machine, with the gear range to take on any terrain.
Salsa Beargrease Carbon SX Eagle
$2,499.00
Beargrease is constructed with a high-modulus carbon fiber frame. This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Its carefully designed geometry results in a fat bike that rides like a trail bike—it’s stable, steers well in loose conditions, and remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider’s center of gravity low, and making dabbing, dismounting, and remounting easier. Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 5" tire without the added rolling resistance. It’s also compatible with 26" and 29" wheels for dialing in the fit or terrain-dependent performance. The Beargrease Carbon frame features fully sleeved internal cable routing. This improves shifting performance in poor conditions, increases time between maintenance intervals, and makes running new cables and housing a breeze. It’s designed for the best drivetrain performance while maintaining narrow fat bike crank arms for less knee stress, with rider-friendly narrow Q-Factor cranks, a 1x optimized frame design, and room for up to a 32t max chainring. Beargrease Carbon features numerous accessory mounts, including toptube bosses for a Salsa EXP Series Toptube Bag (sold separately), 1 – 2 water bottle mounts inside the frame triangle (depending on frame size), and an accessory mount underneath the downtube. Plus, it’s compatible with dropper seatposts for true trail bike riding experiences. Beargrease Carbon SX Eagle delivers the same Beargrease carbon frame as its higher-priced siblings, but with the surefire performance of SRAM’s affordable SX Eagle 1 x 12 drivetrain. Rolling on SUN Ringle Mulefut wheels and 45NRTH Dillinger tires, with SRAM Level brakes and a dependable Salsa cockpit, this bike has everything you need to get your all-terrain adventure on.
Salsa Beargrease Carbon X01 Eagle
$4,699.00
Beargrease is constructed with a high-modulus carbon fiber frame. This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Its carefully designed geometry results in a fat bike that rides like a trail bike—it’s stable, steers well in loose conditions, and remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider’s center of gravity low, and making dabbing, dismounting, and remounting easier. Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 5" tire without the added rolling resistance. It’s also compatible with 26" and 29" wheels for dialing in the fit or terrain-dependent performance. The Beargrease Carbon frame features fully sleeved internal cable routing. This improves shifting performance in poor conditions, increases time between maintenance intervals, and makes running new cables and housing a breeze. It’s designed for the best drivetrain performance while maintaining narrow fat bike crank arms for less knee stress, with rider-friendly narrow Q-Factor cranks, a 1x optimized frame design, and room for up to a 32t max chainring. Beargrease Carbon features numerous accessory mounts, including toptube bosses for a Salsa EXP Series Toptube Bag (sold separately), 1 – 2 water bottle mounts inside the frame triangle (depending on frame size), and an accessory mount underneath the downtube. Plus, it’s compatible with dropper seatposts for true trail bike riding experiences. Featuring a full carbon design, the Kingpin Deluxe Fork is lightweight and durable and provides an amazing array of accessory bosses to help you make the most of your fat bike: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessory, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Beargrease Carbon X01 Eagle doesn’t just roll over anything, it flies. This is the ultimate fat bike designed to convert strength and determination into speed. It is built with a carbon frame, 80mm Mulefut SL rims paired with DT Swiss 350 hubs, and a SRAM Eagle X01 drivetrain for unrivaled performance.
Salsa Blackborow Frameset
$1,399.00
Blackborow is Salsa’s "dream big" cargo fat bike, best paired with an unlimited imagination. The extended wheelbase and rear stays offer huge carrying capacity via abundant frame and fork braze-ons, supporting room for four full-sized panniers on the beautifully engineered rear rack. Top-shelf, double and triple-butted, heat-treated 6066-T6 aluminum tubing is used throughout the frame. Additionally, the tubing is strategically shaped and formed for additional stiffness and strength optimization in key stress areas. The front end is compatible with all our rigid fat bike forks and also fat-specific suspension forks. When Blackborow is sensibly loaded, the bike still feels well balanced and is a pleasure to ride on winding trails compared to other long-tail cargo bikes. Featuring carbon construction with an aluminum steerer, the Kingpin Fork is lightweight and durable, and features an amazing array of accessory bosses to maximize its capabilities: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessories, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Blackborow is compatible with 26 x 3.8–4.33" tires on up to 100mm rim, 27.5 x 3.25–4.0", or 29 x 2.3–3.0". The ability to run multiple wheel and tire sizes allows you to customize the experience and fine-tune the ride height as needed. A removable direct-mount front derailleur bracket allows for a clean 1x build, but it’s also compatible with 2x drivetrain setups. Plus, it’s got internal routing for a dropper post. Blackborow is all about new possibilities, and owners will find themselves able to merge an array of other interests into their two-wheeled adventures.
Salsa Blackborow GX Eagle
$3,299.00
Blackborow is Salsa’s "dream big" cargo fat bike, best paired with an unlimited imagination. The extended wheelbase and rear stays offer huge carrying capacity via abundant frame and fork braze-ons, supporting room for four full-sized panniers on the beautifully engineered rear rack. Top-shelf, double and triple-butted, heat-treated 6066-T6 aluminum tubing is used throughout the frame. Additionally, the tubing is strategically shaped and formed for additional stiffness and strength optimization in key stress areas. The front end is compatible with all our rigid fat bike forks and also fat-specific suspension forks. When Blackborow is sensibly loaded, the bike still feels well balanced and is a pleasure to ride on winding trails compared to other long-tail cargo bikes. Featuring carbon construction with an aluminum steerer, the Kingpin Fork is lightweight and durable, and features an amazing array of accessory bosses to maximize its capabilities: dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessories, lowrider mounts work with our Down Under front rack for a traditional touring setup, and internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs. Blackborow is compatible with 26 x 3.8–4.33" tires on up to 100mm rim, 27.5 x 3.25–4.0", or 29 x 2.3–3.0". The ability to run multiple wheel and tire sizes allows you to customize the experience and fine-tune the ride height as needed. A removable direct-mount front derailleur bracket allows for a clean 1x build, but it’s also compatible with 2x drivetrain setups. Plus, it’s got internal routing for a dropper post. Blackborow is all about new possibilities, and owners will find themselves able to merge an array of other interests into their two-wheeled adventures. Salsa's Blackborow GX includes an array of high-quality components to support the remotest excursions. SRAM's GX Eagle drivetrain features strong and lightweight components as well as a wide-range 12-speed cassette for tackling quickly varying terrain. A set of SUN Ringle Mulefut rims have a plenty-wide 80mm footing, perfect for floating the 45NRTH Dillinger 27.5 x 3.8" tires. A suite of tried-and-true Salsa cockpit components and a WTB Volt saddle round out the build.
Salsa Cutthroat Apex 1
$2,699.00
Cutthroat Apex 1 combines the redesigned Cutthroat carbon frame and fork with the tried-and-true performance of SRAM’s Apex 1 drivetrain. With gear range and cargo capacity for everything from gravel rides to bikepacking expeditions, this is an ultra-endurance bike ready to take you farther than you ever thought you could go.
Salsa Cutthroat Frameset
$2,199.00
The redesigned Cutthroat drop-bar mountain bike and gravel frameset offers more stability and compliance in a package that’s equally at home bikepacking on remote doubletrack, taking the occasional singletrack shortcut, or conquering a gravel race. Build it into the all-day, mixed-surface bike you’ve always wanted.
Salsa Cutthroat GRX 600
$3,299.00
Our riding experiences on the Great Divide Mountain Biking Route have allowed us to develop a perfect Tour Divide bike that’s capable of much more. The Cutthroat GRX 600 delivers the precise performance of Shimano’s latest drivetrain technology and the carbon frame and fork are purpose-built to go the distance—any distance—with all-day comfort in mind. Whether you’re out wandering or chasing waypoints on a weeks-long bikepacking race, Cutthroat is the tool for the job.
Salsa Cutthroat GRX 810 1X
$4,199.00
Cutthroat GRX 810 1x is a mixed-surface missile ready to cover ground with speed and efficiency. Outlast everyone in the pack with the comfort and compliance of the redesigned full-carbon Cutthroat frame and fork and the precision performance of Shimano’s GRX 810 drivetrain. Cutthroat’s unique drop-bar mountain bike geometry delivers a stable ride no matter what’s under your tires.
Salsa Fargo Apex 1
$2,199.00
The Fargo Apex 1 features our steel frame and carbon Firestarter 110 fork, paired with a SRAM Apex 1 drivetrain for smooth shifting. The 29 x 2.2" wheel and tire combination provides excellent rollover, low rolling resistance, and great momentum. 
Salsa Fargo Frameset
$999.00
Fargo is Salsa's original drop bar mountain bike. A bit of a cult classic, it’s designed for mixed surface riders and bikepackers who want the versatility to take any route and the capability to carry everything needed when they’re out for days on end. The Fargo Steel's triple-butted Cobra Kai steel frame is as forgiving as it is reliable on weeks-long expeditions, while the carbon Firestarter fork pairs nicely with the frame and offers bosses and mount points for anything you’d want to attach to a bicycle fork. With an entire world of possible component setups, the Fargo Steel Frameset is a smooth-riding blank canvas you can build into the perfect tool for your two-wheeled needs.